Turnigy nano-tech 5000mah 2S3P 30~60C Hardcase Saddle Lipo Pack
Turnigy nano-tech 5000mah 2S3P 30~60C Hardcase Saddle Lipo Pack
Turnigy nano-tech 5000mah 2S3P 30~60C Hardcase Saddle Lipo Pack

Turnigy nano-tech 5000mah 2S3P 30~60C Hardcase Saddle Lipo Pack

Артикул: NC5000.2S3P.30

26.46 USD

В корзину

More than just a fancy name. TURNIGY nano-tech lithium polymer batteries are built with an LiCo  nano-technology substrate complex greatly improving power transfer making the oxidation/reduction reaction more efficient, this helps electrons pass more freely from anode to cathode with less internal impedance.

In short, less voltage sag and a higher discharge rate than a similar density lithium polymer (non nano-tech) battery.
 
Unfortunately with other big brands, numbers, ratings and graphs can be fudged. Rest assured,TURNIGY nano-techs are the real deal, delivering unparalleled performance!
 
Spec.
Capacity: 5000mAh
Voltage: 2S3P / 2S Cell / 7.4V
Discharge: 30C Constant / 60C Burst
Weight: 285g (including wire & case)
Dimensions: 70x47x25mm (Each)
Balance Plug: JST
Discharge Plug: 4mm Bullet-connector to your own custom plug

Now officialy approved by ROAR for race use!

The nano-core technology in lithium ion batteries is the application of nanometer conductive additives. 
 
1) The nanometer conductive additives form ultrastrong electron-conducting networks in the electrodes which can increase electronic conductivity. 
2) These additives create a superstrong ability for imbibition in the carrier liquid to supply more ion channels. This improves the ability of ion transmission and ion diffusion. 
Through improving electronic conductivity and ion transmission, the impedance is reduced and the polarization of high rate discharge decreases greatly.
 
Advantages over traditional Lipo batteries:
-Power density reaches 7.5 kw/kg.
-Less Voltage sag during high rate discharge, giving more power under load.
-Internal impedance can reach as low as 1.2mΩ compared to that of 3mΩ of a standard Lipoly.
-Greater thermal control, pack usually doesnt exceed 60degC
-Thickness swelling during heavy load doesnt exceed 5%, compared to 15% of a normal Lipolyduring heavy load.
-Higher capacity during heavy discharge. More than 90% at 100% C rate.
-Fast charge capable, up to 15C on some batteries.
-Longer Cycle Life, almost double that of standard lipoly technology.

Нет комментариев

Добавить комментарий
Конструктор сайтов
Nethouse